Daiwa Saltiga Lever Drag 80 Two Speed Reel
Daiwa Saltiga Lever Drag 80 Two Speed Reel is out of stock and on order, it will ship as soon as it arrives. Most items take 2-5 days to get and you'll be contacted before the order is processed.
Delivery & Shipping
Delivery & Shipping
Do you offer free shipping?
We offer free domestic shipping on most orders over $150 subtotal. This excludes oversized and bulky items such as rods, blanks, gaffs, some tackle boxes, lobster nets, landing nets and other large items. Any 1 piece rod over 7'10" in length often incurs the biggest oversize fees charged by domestic shipping companies although we do have lower rates via other carriers on the West Coast. Any additional shipping fees will be automatically calculated at checkout before any billing is done.
What countries do you ship to?
We currently ship products within the US and to almost every country in the world, covering all available destination via UPS and DHL. International shipping times depend on the products and destination. Shipping rates are automatically calculated at checkout, for most countries we also collect Duties and Taxes and prepay them so you do not have to deal with the carrier or customs.
How long will it take to get my order?
Standard shipping can take 3-8 business days depending on location and order volume. If you have requested spooling on your reel or rigging on your lures then it could take an additional day or two. Next day & 2 day shipping is available on most domestic orders (for an additional charge). Orders placed after 12pm Pacific Standard Time will be processed the next business day.
What carriers do you ship with?
We work with UPS, FedEx, US Postal Service, GLS and DHL. When your order qualifies for free shipping or has a rod that qualifies for discounted shipping we reserve the right to choose which carrier it is sent with, otherwise you can pick the service you want. UPS Ground ranges from 1 to 7 day delivery, USPS Priority Mail is typically 1-3 days but is not a guaranteed express service, and USPS Ground Advantage takes roughly 3-7 business days. Longer rods are generally sent via GLS unless otherwise specified, this service ranges from 1 - 10 days.
⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects and or reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Daiwa Saltiga Lever Drag 80 Two Speed Reel
Daiwa Saltiga Lever Drag 80 Two Speed Reel is out of stock and on order, it will ship as soon as it arrives. Most items take 2-5 days to get and you'll be contacted before the order is processed.
The Saltiga Lever Drag 80 2-Speed is the most powerful Saltiga lever drag Daiwa has built, the result of more than six years of design and testing. It is made for the fish that end trips early on lesser gear: giant bluefin, cow yellowfin, and marlin, where the reel has to hold its shape and its drag through a long, heavy fight.
The frame is a single piece milled from solid aluminum. That one-piece build keeps the reel rigid in your hands and, just as important, holds the gears and bearings in tight alignment when the drag is pushed hard, so nothing flexes or binds late in the fight.
Two Speeds, Oversized Stainless Gears
An oversized stainless steel drive gear and pinion carry the load. High gear runs 3.9:1 and picks up 48.6 inches of line per turn for gaining line fast when a fish swims at the boat. Shift to the 1.7:1 low gear, 21.6 inches per turn, when it is time to grind a heavy fish up from below. Stainless gearing resists the pitting and wear that make a reel feel rough under load.
59.5 lb of ATD Drag
Daiwa's ATD (Automatic Tournament Drag) pairs a carbon drag with a grease that stays thin at rest and firms up once the spool starts turning. That takes the start-up jolt out of the strike, so the drag comes on smoothly from the first run and holds steady pressure up to its 59.5 lb maximum, which helps keep hooks from pulling.
Capacity for Record-Class Fish
The deep spool holds 700 yards of 120 lb braid, 550 yards of 150 lb braid, or 350 yards of 80 lb mono. Six CRBB bearings, Daiwa's corrosion-resistant stainless bearings shielded against sand, grit, and salt, are rated to last up to 12 times longer than standard stainless bearings.
Specifications
| Model | SAGLD80-2SPD |
|---|---|
| Gear Ratio (High / Low) | 3.9:1 / 1.7:1 |
| Line per Turn (High / Low) | 48.6 in / 21.6 in |
| Max Drag | 59.5 lb |
| Bearings | 6 CRBB |
| Weight | 60 oz |
| Braid Capacity (J-Braid) | 120 lb / 700 yd 150 lb / 550 yd |
| Mono Capacity | 80 lb / 350 yd |
Key Features
- One-piece frame milled from solid aluminum
- Two-speed gearing: 3.9:1 high, 1.7:1 low
- Oversized stainless steel drive gear and pinion
- ATD carbon drag, 59.5 lb maximum
- 6 CRBB corrosion-resistant ball bearings
- 700 yd of 120 lb braid capacity
Payment & Security
Payment methods
We ensure secure processing of your payment information and do not retain or have any access to your credit card details.
