Toro Tamer Inline Splicing Needle Kit

Complementing their excellent hollow braided lines Toro Tamer also offers a range of tools and ancillary products necessary to maximize the hollow braid's unique benefits. For 2015 Toro Tamer introduced a new line of rigging needles of their own design. Currently we offer three kits as well as individual needle sales. We offer a 16, 9 and 7 needle kits. There are nine sizes of threading needle produced, 20/30/40/50/60/80/100/130/150 and 200#. We produce three sizes of latch needles and three sizes of loop needles.

Light to medium pack, 20/30/40/50/ and 60# size threading needles, a small latch and small loop needle.

The Medium/Heavy kit includes 80/100/130/150 and 200# threading needles, medium and large loop and latch needles. The complete kit includes all 16 needles and carries a suggested retail price of $120, the Medium/Heavy kit sell at $70 and the Light/Medium kit run $60. Toro Tamer brings the cost of inline rigging down to earth. And, with the ease of use of our braided lines, now all anglers can enjoy the benefits of knotless connections - true 100% connection strength with no knots, no casting interference as your line effortlessly flows through the rod's guides.

Our needle's unique design was the result of much time spent using other manufacturers products over the years. There were a few things we felt that could be improved upon in the design of these essential accessories.

One consideration for those selecting threading needles, manufacturers of fluorocarbon and monofilament lines do not have a standard diameter for any given line test. So, in the case of threading needles, an 80 lb. needle may not accommodate all 80 lb. test lines, it might be too snug a fit for some lines and too large for others. There can be variance of diameter between manufacturers and even between batches of lines of the same test. It's best to own a few needles, since leader diameters are not consistent or standardized. Going back to that 80# leader, best to have 60/80 and 100# needles in your kit even if that's the only test you'll be working with. That's one reason why our kits are priced aggressively, we encourage folks to have several needles for use with their lines. Even if an angler only wishes to work with one particular test for inline rigging, it's best to have two or more threading needles just to accommodate different diameters of lines.

A second point to make for folks getting into inline rigging, making wind-ons or even assist hooks, while a loop needle can do many things but it's best used for simply opening up braid which may be hard to work with for a certain size leader or needle diameter. For most all needs, whether doing a splice, making a loop or connecting solid to hollow lines, the latch needle is the preferred tool. The only thing to remember about working with a latch needle is to only go in ONE direction. If you try to reverse or pull the needle backwards the latch will protrude through your braid and get stuck! Once stuck you will need to cut the braid and then extract the needle. If you try to force things you won't get far and you'll probably break your needle. The hook on the latch works just like the barb on a hook. So, keep moving the latch needle forward, never back up.