From the same firm that brought us the InvisaSwivel, comes Knot2Kinky Nickel-Titanium wire. Here’s a wire with a unique twist, it stretches, yes the stuff actually stretches up to 10% of it’s length, and even more surprisingly it bounces back to the original size with no degradation in test. You do not have to crimp this wire, you can tie it! It’s a unique product, and a good one.
Preferred Knots
Clinch Knot Instructions
![]() |
Pass the line through the eye of the swivel leaving several inches of line to work with. |
![]() |
Double back. Twist four to five turns around the line. |
![]() |
Pass the end of the line through the first loop near the eye. To tighten, pull on swivel and line simultaneously. |
![]() |
Pull only as hard as the swivel is rated for. |
![]() |
TIP: There are groves near the eye of the swivel. Make sure the line is seated into the grooves so the line comes straight off the swivel. |
Knot2Kinky Wire
Clinch Knot Instructions
![]() |
Pass the line through the eye of the swivel leaving several inches of line to work with. |
![]() |
Double back. Twist four to five turns around the line. |
![]() |
Pass the end of the line through the first loop near the eye. To tighten, pull on swivel and line simultaneously. |
![]() |
Pull only as hard as the swivel is rated for. |
![]() |
TIP: There are groves near the eye of the swivel. Make sure the line is seated into the grooves so the line comes straight off the swivel. |

Albright Knot Instructions
![]() |
Purpose: To tie a mono/Fluoro line directly to Knot2Kinky wire. |
![]() |
Form a loop in the Knot2Kinky wire. Pass the end of the other line through the loop and wrap it neatly around itself and the two lines of the loop ten times. |
![]() |
Then pass the end back through the loop the same way it entered. |
![]() |
Lubricate, pull the knot tight and clip the tag ends. |
Perfection Loop
Line Strength (lb/kg) | Line Dia. (mm) | Line Dia. (in) |
25/11.4 | 0.254 | 0.010 |
35/15.9 | 0.305 | 0.012 |
45/20.4 | 0.357 | 0.014 |
55/25 | 0.406 | 0.016 |
65/29.5 | 0.457 | 0.018 |
75/34 | 0.508 | 0.020 |
100/45.4 | 0.660 | 0.026 |